Jasic Plasma Cut 45 PFC Plasma Cutter 230 V

£1,105.50 Ex. VAT

• Hand Plasma Cutter
• 45Amp
• PFC (110v/240v)
• Cleancut capacity of 15mm
• Severance cut capacity of 20mm
• Ideal for cutting mild steel, stainless steel and aluminium
• Generator friendly

SKU: 180-127 Categories: , Tag: Brand:

In stock

Buy now, pay later with Klarna. Learn more

Jasic Plasma Cut 45 PFC Plasma Cutter 240v

The Jasic CUT 45 is a hand cutting plasma unit designed for cutting plate materials of up to 20mm thick, with a precise cut. This unit is a single phase and ideal for most applications including workshop and site work applications. With the advanced PFC technology, this allows the unit to be run on either a 110v or 240v supply.

It has a lightweight and robust design, weighing only 9.2kg which makes it maneuverable and suitable for use in the workshop.

What is PFC?

The PFC (Power Factor Correction) is a technique of increasing the power factor of a power supply. Switching power supplies without power factor correction draw current in short, high-magnitude pulses. These pulses can be smoothed out by using active or passive techniques. This reduces the input RMS current and apparent input power, thereby increasing the power factor. This also provides substantial energy-saving benefits for the user.

When plasma cutting it is very important to ensure you purchase a machine that will exceed your maximum plate thickness requirements. We would recommend the Cut 45 for all situations whereby you are cutting up to 15mm – 18mm in thickness. This machine has a clean-cut capacity of 15mm, and a severance cut of 20mm.

The Cut 45 has advanced technology including PWM and high powered IGBT components which offers the best solution for cutting most materials including stainless steel, aluminium and low carbon steels.

What is PWM?

PWM (Pulse Width Modulation) speed control works by driving the motor with a series of “ON-OFF” pulses and varying the duty cycle, the fraction of time that the output voltage is “ON” compared to when it is “OFF”, of the pulses while keeping the frequency constant.

Features & Benefits

• High-end IGBT plasma cutter
• Wide voltage inverter 95V-265V
• Intelligent digital control technology
• Clean cuts 15mm, severance cut 20mm
• Cuts steel, stainless, copper, cast iron & aluminium
• Cutting speed is increased 1.8 times when compared with oxy-acetylene cutting.
• Lightweight, portable modern cutter
• Variable cutting control
• Soft-touch LED control display
• IGBT protection system
• Smooth precise cutting
• PFC Energy-saving cutting inverter
• Air check indicator
• Easy-start ignition mode
• PT-60 Plasma Cutting Torch (6m)
• Torch protection system
• 2T/4T cutting operation
• Can be used with automated plasma cutting systems
• Generator friendly plasma cutter
• High-quality rubberised finish to handle/mouldings

Technical Data

• Input Voltage AC 95-265V – 50/60 Hz
• 115V 230V
• Ieff (A) 17 13.5
• Input Power (kVA) 3.6 5.29
• Current Range (A) 20 – 30 20 – 45
• Duty Cycle @ 40°C 30A @ 30% 45A @ 35%
• Cutting Capacity (Clean) 8mm 15mm
• Cutting Capacity (Severance) 10mm 20mm
• Efficiency (%) 85
• Power Factor 0.99
• Protection/Insulation Class IP21S/F
• Compressed Air Requirement 170 Ltr/Min @ 4.5 Bar (65 psi)
• Dimensions (LxWxH mm) 439 x 165 x 328
• Weight (Kg) 9.2

Did you know we also sell a range of the Fiac Workhorse Compressors including the Screw type machines with the dryer?

Shipping Info

Standard Delivery

Orders over £150: FREE SHIPPING

Estimated: Orders placed before 5pm are shipped the following business day.

Express Delivery

Orders under £150: £9.95+ VAT

Estimated: Orders placed before 5pm are shipped the following business day.

Find out more about our Shipping Policies and our Returns & Exchanges.